Analysis
Business Bay water
Primary reference case. Data first, then analysis, recommended solution and proven impact.
SAMPLE DATA MODE
Actual flow
3,842 L/hr
Deviation
+73.8%
01 Data
What is happening?
02 Analysis
What is wrong and why?
03 Solution
What should be done?
04 Impact
What changed and can we prove it?
Data context
- Organisation
- NEXUS Reference Portfolio
- Site
- Business Bay HQ · BB-HQ
- Building
- BB-HQ-MAIN · Headquarters
- Location
- Business Bay, Dubai, UAE
- Asset
- WR-L18 — L18 Domestic Water Riser
- Data source / Meter
- SM1182 · Simulated Smart Meter
- Metric
- Water Flow
- Unit
- L/hr
- Resolution
- Asset / Zone
- Data quality
- High — Sample
- Integration
- SIMULATED — NO LIVE BMS / IOT CONNECTION
- Data mode
- Sample
Facility intelligence topology
01 Data
Water flow signature
What is happening?
Water flow signature
WR-L18 — L18 Domestic Water Riser · SM1182 · Simulated Smart Meter
Actual
3,842 L/hr
Baseline
2,210 L/hr
Deviation
+73.8%
02 Analysis
Intelligence evidence
What is wrong and why?
Abnormal flow
Confirmed
Critical anomaly
Continuous flow
Detected
Overnight residual did not collapse with occupancy.
Baseline deviation
+73.8%
Actual 3,842 L/hr versus baseline 2,210 L/hr.
Operating pattern
Outside expected range
Sustained flow on WR-L18 after occupancy collapse.
Data quality
High — Sample
SM1182 · Simulated Smart Meter
Detection resolution
Asset / Zone
WR-L18 — L18 Domestic Water Riser
- NEXUS analytics
- Calculates
- Water Analytics Engine
- INFIGROWTH AI
- Explains. Never calculates.
- Interpretation / Prioritisation
- Source
- SM1182 · Simulated Smart Meter
Where this data comes from
Data lineage
SAMPLE DATA
- Organisation
- NEXUS Reference Portfolio
- Site
- Business Bay HQ · BB-HQ
- Asset
- WR-L18 — L18 domestic water riser
- Source ID
- SM1182 · L18 water sub-meter
- Source type
- SMART METER / SIMULATED METER
- Metric
- Water Flow · L/hr
- Data quality
- HIGH — SAMPLE
- Detection resolution
- ASSET / ZONE
- Source
- NEXUS Simulator
- Stored in
- Railway PostgreSQL
- Analysis
- Water Analytics Engine
- AI role
- Interpretation / Prioritisation
Data limitation
- Sample stream only. No live BMS or IoT connectivity.
03 Solution
Recommended solution
What should be done?
Primary action
Inspect and isolate the L18 domestic water-riser area, confirm the source of abnormal flow, take appropriate corrective action after investigation and measure post-action flow against the baseline.
Sustained flow after occupancy collapse. Pattern matches a bypassed isolation valve on the L18 riser.
01 Inspect
Inspect the L18 riser and night-flush valve for continuous abnormal flow.
02 Isolate
Isolate the L18 riser so the residual stream can be confirmed.
03 Confirm
Confirm meter SM1182 after isolation.
04 Correct
Correct the identified isolation or fixture issue.
05 Measure
Compare post-action flow against the 2,210 L/hr baseline.
06 Verify
Record evidence-backed before/after comparison in the Impact Ledger.
NEXUS recommends; people approve and carry out the work. NEXUS does not control equipment.
04 Impact
Verified sample impact
What changed and can we prove it?
VERIFIED SAMPLE IMPACT
SAMPLE DATAVERIFIEDNight-flush valve isolated
JLT Operations Centre · Sub-meter SM0881
01 Before
15,680 L/night
↓
02 Action
Night-flush valve isolated
↓
03 After
3,280 L/night
↓
04 Verified result
AED 36,208
- Reduction
- 4.53M L avoided
- Financial impact
- AED 36,208
- Evidence
- Sub-meter SM0881
- Confidence
- 95%
How this was calculatedShow workingHide working
Sample record. Quantities come from the sample meter window; values are derived as shown.
1. Water avoided per year
(15,680 − 3,280) L/night × 365 nights
= 4,526,000 L
2. Volume in cubic metres
4,526,000 L ÷ 1,000
= 4,526.0 m³
3. Financial value
4,526.0 m³ × 8.00 AED/m³
= AED 36,208
4. Carbon avoided
Not calculated — no confirmed water emission factor
= —
Assumptions used
- Water rate: 8 AED / m³Sample assumptionIllustrative sample rate. Not a published tariff. Replace with the site's billed rate.
- Water supply emission factor: noneNot availableNo confirmed published factor located. Carbon is not calculated for water records until a confirmed factor is supplied.
NOT ACTUAL CUSTOMER SAVINGS
Open water potential remains sample only until measurement and verification complete. NOT ACTUAL CUSTOMER SAVINGS
Data maturity
REAL-TIME SIMULATION
Source: NEXUS Simulator. Integration: SIMULATED. Not live IoT connectivity.
NEXUS ZERO is designed to work with the data an organisation already has, with deeper analysis as data maturity improves.
No new sensor installation is required by the design. The depth of analysis depends on how often data arrives.
Source types in the data model
Utility bills · Manual meter readings · CSV · API · BMS / EMS / CMMS · Smart meter · IoT sensor
Not yet built: file upload, utility-bill import and live connectors to building systems.
MANUAL
Utility bills, manual readings, spreadsheets
↓
PERIODIC
Scheduled meter exports, CSV, monthly/weekly data
↓
CONNECTED
API, BMS/EMS/CMMS integration, smart meters
↓
REAL-TIME
High-frequency meters/sensors
↓
AUTONOMOUS-READY
Governed control integration and verified write-back capability